Coastal areas & estuaries
COASTAL AREAS & ESTUARIES | OCEANOGRAPHIC STUDIES & ENVIRONMENTAL MONITORING | FISHING & OYSTERFARMING | LAKES & RIVERS | DEEP SEA | CORROSION & IMMERSED SYSTEM BEHAVIOUR
This application is the key activity of NKE Instrumentation as it proposes best quality and very robust products that are equipped with proefficient anti-fouling protection. NKE offers a wide range of sensors among them full autonomous data loggers. There are also dedicated and specific measuring instruments to measure sedimentation, wave tide and much more parameters. NKE is also capable to furnish real-time monitoring to measure the physico-chemical parameters of water or current parameters thanks to instrumented buoys.
ALTUS: Siltation, Sedimentation, Erosion
Description - Altus permits to study mudflats or beach level variations according to tidal currents and swell. This high frequency acoustic data logger is equipped with a 2 MHz transducer located on a light frame at a given distance from the seabed. Altus can be used as tidegauge thanks to its accurate pressure sensor. The parameter setting and reading of the Atlus are carried out using a Data Pencil connected to the serial link of a PC computer. All the command functions are available in the Winmemo II software supplied with the Data Pencil.
Download - Datasheet
WiSens TD: Temperature and Pressure
Description - The WiSens TD data logger measures and records pressure and temperature over a depth range from 0 to 6000 meters. Four versions are available: 50m, 500m, 1000m and 6000m. The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the docking activating clip supplied. The flexible configuration and the recovery of data do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).
Download - Datasheet
WiSens CTD: Conductivity, Temperature, Depth
Description - The WiSens CTD data logger measures and records conductivity, pressure and temperature over a depth range from 0 to 50 meters. The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).
Download - Datasheet
WiSens CTDS: Conductivity, Temperature, Depth and Salinity
Description - The WiSens CTDS data logger measures and records conductivity, pressure and temperature over a depth range from 0 to 300 meters. Salinity is then deducted by calculation. The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).
Download - Datasheet
WiSens CTDSV: Conductivity, Temperature, Depth, Salinity and Sound Velocity
Description - The WiSens CTDSV data logger measures and records conductivity, pressure and temperature over a depth range from 0 to 300 meters. Salinity and sound velocity are then deducted by calculation. The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).
Download - Datasheet
WiSens TBD: Temperature, Depth and Turbidity
Description - The WiSens TBD data logger measures and records turbidity, pressure and temperature over a depth range from 0 to 50 meters. The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).
Download - Datasheet
WiSens Wave: Temperature, Depth, Wave height, Tide
Description - The WiSens Wave data logger measures and records temperature and pressure for assessing waves or tides over a depth range from 0 to 50 meters. The maximum depth immersion for measurement is 40 meters. The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the docking activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).
Download - Datasheet
WiMo Wave / Tide
Description - The WiMo sonde can be used as a data logger as you can use it without any sensors. It means the WiMo sonde is also a wave and tide underwater logger as temperature and pressure parameters are directly embedded within the device. The aim of this functionality is to measure centimetric fluctuations and to be able to acquire high sampling rates of up to 16Hz in the pressure parameters. It can be used down to 50 meters.
Download - Datasheet
WiSens T: Temperature
Description - The WiSens T data logger measures and records temperature over 300 m depth. The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the docking activating clip supplied. The flexible configuration and the recovery of data do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).
Download - Datasheet
WiSens T6000: deep water accurate marine heat flow measurement
Description - The WiSens T6000 measures and records temperature with very high accuracy down to 6000m depth. It can be mounted on a corer to measure heat flow. The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).
Download - Datasheet
SMALL Coastal Float
Description - The small coastal float allows to easily deploy a multiparameter probe SAMBAT at sea or on the water surface. It provides protection against shocks and reduces the development of biofouling on the multiparameter probe. When the probe is mounted on the float, the various sensors of the multiparameter probe are located one meter below the water surface. The operation of removing putting back the mechanical set “SAMBAT support pole” does not require any tool which allows fast, practical and easy maintenance.
Ask for quoteLearn moreMEDIUM Coastal Buoy
Description - The medium coastal buoy is a 600 liters float that is mounted on central galvanized steel body. The aim of this buoy is to integrate a multiparameter probe SAMBAT and its GPS/GPRS antenna mounted on an aluminum support pole. The SAMBAT support pole is an aluminum tube that allows to immerse the sensors of the probe in a 2 meters depth and to position the GPS/GPRS antenna in an unobstructed area for GPS reception and GPRS transmission.
Ask for quoteLearn moreInstrumented buoy – water parameters & current flow measurements
Description - The instrumented buoy is designed to measure the water parameters, the flow current, the wave and the weather conditions. A multiparameter probe SAMBAT can be integrated in. The whole system is managed by the ABIN automaton. The data and alarms are sent via a GPRS modem as a file attached to an email. The instrumented buoy is an autonomous system equipped with solar panels and battery.
Ask for quoteLearn moreInstrumented buoy – measurement chain & current sensor
Description - The instrumented buoy was set up in 2005 and the aim of this buoy is to measure the river temperature, in real time, from surface to ten meter depth, when the nuclear power plan is rejecting cooling water. The instrumented buoy is equipped with a measurement temperature chain, atmospheric pressure sensor, depth sensor and ADCP-current sensor and the data are transmitted via GPRS and UHF to the final user. The whole system is developed and manufactured by NKE Instrumentation.
Ask for quoteLearn morePCO2 CARIOCA Buoy
Description - CARIOCA is an automatic drifting or fixed buoy designed to measure the concentration of pCO2 at the surface of the ocean in order to qualify the CO2 exchange between atmosphere and ocean. Moreover, to enable correlation the buoy is fitted with sea surface temperature (SST), practical salinity, fluorescence and dissolved oxygen measurements. It also includes ARGOS transmission equipment and power supply to achieve one year of operating autonomy with measurements every hour. The body of the CARIOCA buoy consists of a tube (0.20m in diameter and 2.5m in length). A wider yellow floating body surrounds the upper part of the tube. The total weight of the buoy is about 130 kg.
Download - Datasheet