Lakes & Rivers

COASTAL AREAS & ESTUARIES | OCEANOGRAPHIC STUDIES & ENVIRONMENTAL MONITORING | FISHING & OYSTERFARMING | LAKES & RIVERS | DEEP SEA | CORROSION & IMMERSED SYSTEM BEHAVIOUR

NKE Instrumentation offers a range of solutions dedicated to fresh water applications that are equipped with proefficient anti-fouling proection. The company is involved in errosion and sedimentation concerns and proposes solutions to monitor those parameters. There is also a wide range of compact and robust underwater loggers that are capable of measuring the quality of pumping water or water quality of sweaming water – it means that controls bacteriological risks and it follows pollution indicators.

ALTUS: Siltation, Sedimentation, Erosion

Description - Altus permits to study mudflats or beach level variations according to tidal currents and swell.

This high frequency acoustic data logger is equipped with a 2 MHz transducer located on a light frame at a given distance from the seabed. Altus can be used as tidegauge thanks to its accurate pressure sensor.

The parameter setting and reading of the Atlus are carried out using a Data Pencil connected to the serial link of a PC computer. All the command functions are available in the Winmemo II software supplied with the Data Pencil.

Download - Datasheet

WiSens CTD: Conductivity, Temperature, Depth

Description - The WiSens CTD data logger measures and records conductivity, pressure and temperature over a depth range from 0 to 50 meters.

The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).

Download - Datasheet

WiSens TBD: Temperature, Depth and Turbidity

Description - The WiSens TBD data logger measures and records turbidity, pressure and temperature over a depth range from 0 to 50 meters.

The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).

Download - Datasheet

WiSens Wave: Temperature, Depth, Wave height, Tide

Description - The WiSens Wave data logger measures and records temperature and pressure for assessing waves or tides over a depth range from 0 to 50 meters. The maximum depth immersion for measurement is 40 meters.

The data is stored in FLASH memory and can be retrieved by the user after the unit has been recovered. Connection to the data logger is achieved through a WiFi link that the user can activate using the docking activating clip supplied. The flexible configuration and the recovery of data that do not require dedicated software. The data logger can be fully used from a Web browser such IE, Safari or other with any PC (MAC/Windows), Tablet or Smartphone (Android/IOS).

Download - Datasheet

SAMBAT: Multiparameter probe

Description - SAMBAT is an autonomous multiparameter probe used to monitor and control water quality, fresh water and sea environment.

This multiparameter probe is used to measure and record the main physical water parameters among them temperature, depth, conductivity, salinity, turbidity, fluorescence, dissovled oxygen and pH.

The probe is equipped with brush and teletransmission as it uses the brush to protect sensors from biogfouling. The measured data can be transferred by e-mail thanks to the integrated GSM modem.

Download - Datasheet

SAMBAT Float

Description - The SAMBAT float allows to easily deploy a multiparameter probe SAMBAT at sea or on the water surface. It provides protection against shocks and reduces the development of biofouling on the multiparameter probe..

When the probe is mounted on the float, the various sensors of the multiparameter probe are located one meter below the water surface.

The operation of removing putting back the mechanical set “SAMBAT support pole” does not require any tool which allows fast, practical and easy maintenance.

The system provided by NKE Instrumentation includes several parts such as a central body that is equipped with a 20L float, a SAMBAT support pole, a locking pin with an artillery padlock, a kit of screws, a tool kit and mooring ballast that weights 3kg.

STPO²: Temperature, Depth, Dissolved Oxygen, Fishing

Description - The STPO2 data logger measures and records dissolved oxygen, water depth and temperature in coastal waters. The data logger is easy to use as it benefits from a fast wireless configuration and data collection thanks to a communication interface connected to the USB port of a PC using Winmemo software.

The logger is rugged and reliable and it is very optimal as there is a shockproof protection for the sensors. There is also a set up and data transmission that is possible via Recopesca architecture.

Download - Datasheet